Core Safety Group

Tag: workplace safety

When OSHA Shows Up: What Construction Companies Should Know

For construction companies, an OSHA inspection can happen with little warning. An inspection may be triggered by a serious injury or fatality, an employee complaint, a referral, or one of OSHA’s programmed enforcement initiatives. In fiscal year 2025, federal OSHA conducted more than 30,000 inspections, including both programmed and unprogrammed inspections.

When an OSHA compliance officer arrives at a jobsite, preparation matters. Companies that understand the inspection process, know their responsibilities, and have established procedures for responding can navigate the process more effectively.

An OSHA inspection should not be treated as simply a search for violations. It is an opportunity for OSHA to evaluate workplace conditions, safety practices, employee knowledge, and the employer’s overall approach to managing hazards.

Understanding Why OSHA May Be at Your Jobsite

Not every OSHA inspection begins the same way.

OSHA conducts both programmed and unprogrammed inspections. Programmed inspections focus on industries, workplaces, or hazards that OSHA has identified for increased enforcement attention. Unprogrammed inspections can result from employee complaints, referrals, injuries, fatalities, or other circumstances.

Understanding the reason for an inspection can help an employer understand its potential scope. However, an inspection that begins with a specific concern can expand if the compliance officer identifies additional hazards or receives information indicating that other areas of the workplace may require attention.

This is particularly important on construction sites, where conditions can change quickly and multiple employers may be working in the same area.

What Happens When an OSHA Inspector Arrives?

An OSHA inspection generally begins with the compliance officer presenting credentials and identifying the purpose of the inspection. An opening conference may follow, during which OSHA explains the general scope of the inspection and discusses the rights of the employer and employees.

From there, the inspection may include a physical walkaround, review of records and documentation, photographs, measurements, and employee interviews. OSHA compliance officers may also conduct private employee interviews as part of the inspection process.

For employers, this means the inspection is about more than what is immediately visible on the jobsite.

A company may have a written safety program and required training records, but OSHA can also look at whether those policies are actually being implemented in the field.

What OSHA May Look At Beyond the Obvious Hazard

A common misconception is that an OSHA inspection is simply about finding a visible violation.

In reality, compliance officers may evaluate a much broader picture of workplace safety. That can include:

  • Physical conditions and hazards at the worksite

  • Safety policies and procedures

  • Employee training and knowledge

  • OSHA injury and illness records

  • Hazard assessments

  • Personal protective equipment

  • Safety documentation

  • Employer and employee communication

  • How safety procedures are implemented in the field

Employee interviews can be particularly important because they can provide OSHA with information about how work is actually being performed, not just what a written policy says should happen. OSHA’s inspection procedures specifically recognize employee interviews as a way to evaluate workplace conditions, work practices, and the implementation of safety and health programs.

This is one reason having a safety program on paper is not enough. The program needs to reflect what is happening on the jobsite.

Communication Matters During an Inspection

An OSHA inspection can be stressful, but employers should approach the process professionally and thoughtfully.

Employees and management should understand who is responsible for communicating with the compliance officer, how the inspection will be coordinated, and where relevant documentation can be found. At the same time, employees should never be coached to provide particular answers or discouraged from exercising their rights.

OSHA’s inspection procedures provide opportunities for employer and employee representatives to participate in the physical inspection, while OSHA may also conduct private employee interviews.

Having established procedures before an inspection occurs can help prevent confusion and ensure that everyone understands their role.

The Inspection Doesn't End When OSHA Leaves

The end of the walkaround does not necessarily mean the end of the process.

OSHA generally conducts a closing conference at the conclusion of an inspection. The compliance officer may discuss apparent violations, potential corrective measures, and other findings with the employer.

If citations are issued, employers must understand what the citations mean, what deadlines apply, and what options may be available.

This is also an important point for companies to evaluate their own safety practices. An inspection can reveal gaps that extend beyond the specific conditions OSHA identified. Addressing those underlying issues can help prevent similar problems from occurring elsewhere on the project or at other company locations.

Preparing Before OSHA Arrives

The best time to prepare for an OSHA inspection is before one happens.

Construction companies should regularly evaluate their jobsites, review safety documentation, train employees on their responsibilities, and make sure written procedures accurately reflect actual work practices.

OSHA’s preliminary FY2026 Top 10 most frequently cited standards continues to include construction hazards such as fall protection, scaffolding, ladders, and fall-protection training. These recurring citations provide valuable insight into the hazards OSHA continues to encounter during inspections.

The goal should not simply be to make a jobsite look compliant when an inspector arrives. It should be to build safety practices that are consistently followed whether OSHA is present or not.

How CORE Safety Group Can Help

Preparing for an OSHA inspection can be challenging, especially for contractors managing multiple jobsites, crews, and safety requirements. Having experienced safety professionals available can help organizations identify potential gaps and address them before they become larger concerns.

CORE Safety Group works with contractors to provide practical safety support tailored to their operations. Our team can help with:

  • Safety Consulting to evaluate safety practices, identify potential gaps, and provide ongoing guidance
  • Safety Staffing to provide dedicated safety professionals for projects that require onsite support
  • Safety Program Assessments to evaluate existing safety programs and identify areas for improvement
  • Mock OSHA Inspections to help companies understand what an OSHA inspection may look like and identify potential concerns before an actual inspection
  • Safety Training to ensure employees and supervisors understand the safety requirements associated with their work
  • OSHA Training including OSHA 10-Hour and OSHA 30-Hour courses for construction professionals
  • Written Safety Programs to develop and maintain procedures that align with a contractor’s operations
  • Jobsite Safety Inspections to identify hazards and evaluate conditions before they attract OSHA’s attention
  • OSHA Citation & Claims Defense to help organizations navigate the process after receiving an OSHA citation
  • Safe Assist for contractors looking for ongoing outsourced safety management and support

CORE can also help organizations determine which combination of services best fits their needs, whether they are preparing for an OSHA inspection, strengthening an existing safety program, or looking for ongoing support across their jobsites.

Preparedness Is Part of Safety

An OSHA inspection can be an intimidating experience, but companies do not have to wait for an inspector to identify gaps in their safety program.

Understanding the inspection process, knowing what OSHA may evaluate, and regularly assessing how safety practices are implemented in the field can help construction companies take a more proactive approach to compliance.

The goal is not simply to avoid a citation. It is to create a safety program that works every day, protects employees, and stands up to scrutiny when it matters most.

 

 

 

 

If your organization needs help preparing for an OSHA inspection or evaluating its current safety practices, CORE Safety Group can help. Contact our team to learn more about Mock OSHA Inspections, OSHA Citation & Claims Defense, and our other safety consulting services.

This information is provided for general informational purposes and is not intended to constitute legal advice or replace site-specific safety guidance

    Let's better your safety program

    Call: 888-250-1830

    Request a Quote












    For online training courses please visit our online training page





    Near-Miss Reporting in Construction: Turning Close Calls Into Safer Jobsites

    Construction jobsites are constantly changing. New equipment arrives, crews move between work areas, subcontractors begin different phases of work, and conditions can change from one day to the next. With so many moving parts, incidents can happen even when safety procedures are in place.

    But not every hazardous situation results in an injury or property damage.

    Sometimes a worker narrowly avoids being struck by equipment. A tool falls from an elevated platform but no one is underneath it. An employee notices an unsafe condition just before an incident occurs. These situations are often referred to as near misses, and they can provide valuable insight into potential hazards before someone gets hurt.

    A strong near-miss reporting process gives employers an opportunity to identify these warning signs, understand why they occurred, and make changes before a similar situation leads to an incident.

    What is a Near Miss?

    A near miss is an unplanned event or unsafe condition that could have resulted in an injury, illness, property damage, or other loss but did not.

    For example, consider a worker walking through a construction area when a piece of material falls from an elevated platform and lands nearby. No one is injured, but the event reveals a potential falling-object hazard.

    Other examples might include:

    • A worker nearly being struck by moving equipment
    • A vehicle backing into an area where workers are present
    • An unsecured tool falling from an elevated work area
    • A worker slipping on a wet surface but catching themselves
    • A piece of equipment malfunctioning without causing an injury
    • Materials shifting or falling during handling
    • An employee discovering an unguarded piece of equipment before using it
    • A worker entering an area that was not properly barricaded

    While the outcome may appear positive because no one was injured, the underlying hazard still exists.

    That makes the near miss an opportunity to learn.

    Why Near-Miss Reporting Matters

    Injury and incident reports tell employers what happened when something went wrong. Near-miss reports can provide insight into what almost went wrong.

    When employees consistently report near misses, employers can begin identifying patterns that may otherwise go unnoticed.

    For example, several near misses involving workers and mobile equipment could indicate that pedestrian and equipment routes need to be reevaluated. Multiple reports involving falling materials could point to problems with storage, housekeeping, or overhead work controls.

    Instead of waiting for an injury to reveal a weakness in the safety program, employers can use near-miss information to identify potential problems earlier.

    The goal isn’t to eliminate every unexpected event. The goal is to learn from these events and use that information to reduce the likelihood and severity of future incidents.

    Creating a Culture Where Employees Report Near Misses

    Having a near-miss reporting form is only one part of an effective reporting program.

    Employees need to feel comfortable reporting hazards and close calls without worrying that they will automatically be blamed or punished.

    If workers believe reporting a near miss will result in disciplinary action, they may be less likely to speak up. That can prevent management from learning about hazards that could eventually contribute to an injury.

    A strong reporting culture encourages employees to communicate when something doesn’t look right, even when no one was hurt.

    Supervisors can help establish that culture by:

    • Taking reports seriously
    • Thanking employees for bringing hazards forward
    • Responding to reports promptly
    • Focusing on identifying contributing factors
    • Communicating what actions were taken
    • Avoiding unnecessary blame
    • Sharing lessons learned with the workforce

    Employees are more likely to continue reporting when they can see that their concerns lead to meaningful action.

    Make Reporting Simple

    A complicated reporting process can discourage employees from using it.

    Near-miss reporting should be straightforward enough that a worker or supervisor can quickly document what happened and provide the information needed for follow-up.

    A basic report may include:

    • Date and location
    • Description of what happened
    • Work activity being performed
    • Potential consequences
    • Equipment or materials involved
    • Immediate actions taken
    • Contributing factors
    • Recommended corrective actions

    Photos can also be useful when appropriate. A photo of the work area or condition involved can help safety personnel better understand what occurred.

    The purpose of the report is not to create unnecessary paperwork. It is to capture useful information that can help prevent future incidents.

    Look Beyond the Immediate Cause

    When reviewing a near miss, it can be tempting to focus on the individual action that occurred immediately before the event.

    For example, if a worker nearly trips over a piece of material, the obvious response might be to remind the worker to watch where they are walking.

    But a stronger investigation asks additional questions.

    Why was the material there?

    Was there inadequate housekeeping? Was the material temporarily stored in that location? Was there a designated storage area? Were employees aware of the expected housekeeping procedures? Was the work area congested because of the current phase of construction?

    Looking beyond the immediate action can help employers identify underlying conditions that may contribute to repeated problems.

    The goal is to correct the hazard, not simply remind employees to be more careful.

    Use Near-Miss Data to Identify Trends

    One near miss may appear to be an isolated event. Multiple similar near misses can reveal a trend.

    Construction companies can review reports over time to identify recurring issues involving:

    • Specific jobsites
    • Certain types of equipment
    • Particular work activities
    • Specific phases of construction
    • Certain shifts or times of day
    • Housekeeping
    • Personal protective equipment
    • Employee training
    • Communication between crews
    • Subcontractor activities

    For example, if multiple reports involve employees nearly being struck by equipment, that could indicate a broader issue with traffic control or pedestrian routes.

    If several reports involve workers slipping in the same area, the company may need to address drainage, housekeeping, walking surfaces, or another underlying condition.

    Tracking this information allows safety teams to move from reacting to individual events toward identifying patterns and addressing recurring hazards.

    Turn Reports Into Corrective Actions

    Collecting near-miss reports is only useful if the information leads to action.

    Once a report is submitted, employers should determine what changes may be necessary to reduce the likelihood of the situation happening again.

    Depending on the circumstances, corrective actions could include:

    • Changing a work procedure
    • Repairing or replacing equipment
    • Improving housekeeping
    • Adding barricades or signage
    • Changing traffic patterns
    • Providing additional training
    • Modifying material storage
    • Increasing supervision
    • Updating a written safety procedure
    • Conducting additional inspections

    Corrective actions should also be followed up to make sure they were actually implemented and are addressing the identified hazard.

    A report that simply gets filed away does not improve jobsite safety.

    Share Lessons Learned With the Workforce

    Near misses can also become valuable training opportunities.

    When appropriate, employers can share anonymized examples during toolbox talks, safety meetings, or training sessions.

    For example, a supervisor might explain that a worker recently encountered an unsecured extension cord across a walkway. Rather than simply correcting that individual situation, the supervisor can use it as an opportunity to remind the entire crew about housekeeping expectations and proper cord management.

    Sharing lessons learned can help employees recognize similar hazards in their own work areas.

    It also reinforces the idea that reporting a near miss contributes to the safety of the entire team.

    Near-Miss Reporting Should Complement Jobsite Inspections

    Near-miss reporting should not replace regular safety inspections.

    Inspections provide an opportunity for safety professionals and supervisors to proactively identify hazards, while near-miss reports provide insight into situations employees have actually encountered during their work.

    Together, these approaches can provide a more complete picture of jobsite conditions.

    For example, an inspection may identify that a pedestrian route is poorly defined. A near-miss report may then reveal that an employee was nearly struck by equipment while crossing that same area.

    The two pieces of information can reinforce each other and help identify where additional controls may be needed.

    How CORE Safety Group Can Help

    Developing an effective safety program involves more than responding after an incident occurs. Companies need processes that help identify hazards, evaluate risks, and continuously improve safety practices.

    CORE Safety Group can help organizations develop and strengthen their approach to construction safety.

    Our team can provide support through services including:

    Whether an organization needs help establishing a reporting process, evaluating existing safety practices, or providing ongoing safety oversight, CORE can help develop an approach based on the organization’s operations and needs.

    Use Near Misses as an Opportunity to Prevent Incidents

    A near miss may seem like a situation where everything worked out because nobody was injured.

    But it can also be a warning.

    Every close call provides an opportunity to ask what happened, why it happened, and what can be changed to prevent a similar situation in the future.

    When employees are encouraged to report near misses, supervisors respond appropriately, and organizations turn reports into meaningful corrective actions, those close calls can become valuable tools for improving safety.

    The goal is not simply to have fewer incident reports. It is to create a safety culture where employees feel comfortable identifying hazards, organizations learn from what happens on the jobsite, and corrective actions are taken before a near miss becomes an injury.

     

     

     

     

    If your organization needs additional support managing construction safety, CORE Safety Group can help.

    Contact CORE Safety Group to discuss your safety management needs and learn how Safe Assist® can provide ongoing safety support for your organization.

    This article is provided for general informational purposes and is not legal advice. Employers should consult qualified safety professionals and legal counsel regarding their specific circumstances.

      Let's better your safety program

      Call: 888-250-1830

      Request a Quote












      For online training courses please visit our online training page





      Why Construction Safety Programs Need to Evolve With the Jobsite

      A strong construction safety program gives contractors a framework for identifying hazards, establishing expectations, and protecting workers. But even the most comprehensive safety program cannot anticipate every condition that may develop over the course of a construction project.

      Construction jobsites are constantly changing. Crews change, new subcontractors arrive, equipment and materials are introduced, work moves into different phases, and weather and site conditions can create new hazards. A safety program that worked during one phase of a project may not fully address the risks present several weeks or months later.

      For that reason, construction safety should not be viewed as a set-it-and-forget-it process.

      An effective safety program needs to evolve alongside the work.

      Construction Jobsites Are Constantly Changing

      Unlike many other work environments, construction sites can look completely different from one day to the next.

      A project may begin with site preparation and excavation before moving into structural work, roofing, electrical, mechanical, interior buildout, and finishing activities. Each phase introduces different equipment, crews, materials, and potential hazards.

      Even when the overall project remains the same, conditions can change within a single shift.

      New work areas may open, temporary protections may be removed or relocated, multiple trades may begin working in the same area, or equipment may be brought onto the site. These changes can create hazards that were not present when the original safety plan was developed.

      OSHA’s recommended practices for construction safety programs emphasize regularly identifying and assessing hazards as work progresses and conditions change.

      A safety program should provide the foundation for the project, but it should also leave room to respond to what is actually happening on the jobsite.

      When a Safety Program Becomes Outdated

      A written safety program can establish important procedures and expectations, but the document itself does not make a jobsite safe.

      Problems can arise when contractors rely on a safety program without regularly evaluating whether its procedures still reflect current operations.

      For example, a project may begin with a relatively small crew and limited equipment. Several months later, additional subcontractors may be working onsite, material deliveries may increase, and crews may be performing work at elevated heights or in more congested areas.

      The original safety procedures may still be technically correct, but they may no longer address every risk associated with the current phase of work.

      Some signs that a safety program may need to be reviewed include:

      • New construction activities or phases are beginning
      • New equipment or materials are introduced
      • Additional subcontractors or employees join the project
      • Employees are performing tasks that were not part of the original scope
      • The work environment or site layout changes
      • New hazards are identified during inspections
      • The same safety issues continue to occur
      • An incident or near miss reveals a gap in existing procedures

      These changes do not necessarily mean the entire safety program needs to be rewritten. They may indicate that specific procedures, training, or controls need to be reviewed and updated.

      Safety Planning Should Follow the Work

      One of the most effective ways to keep a safety program relevant is to connect safety planning to the actual work being performed.

      Before a new phase begins, contractors should consider what has changed and what new hazards could be introduced.

      That may include asking:

      • What work activities are starting or ending?
      • What new equipment will be used?
      • Are different trades working in the same area?
      • Have access points or site conditions changed?
      • Does the existing PPE or fall protection approach still apply?
      • Do employees need additional training?
      • Are existing procedures still appropriate for the work being performed?

      Taking the time to evaluate these questions can help contractors identify potential problems before a new phase of work is fully underway.

      Training Should Change When the Work Changes

      A safety program is only effective when employees understand how it applies to the work they are performing.

      General safety training provides an important foundation, but employees may also need additional training when their responsibilities, equipment, or work environment changes.

      For example, an employee who has completed general construction safety training may still need task-specific instruction before performing work involving new equipment or higher-risk activities.

      Training should also be reinforced when safety issues are identified. If inspections repeatedly uncover the same type of hazard, the problem may not simply be a lack of enforcement. Employees may need additional instruction or clarification about the expected procedure.

      Regular communication, toolbox talks, refresher training, and task-specific training can help keep safety expectations aligned with current work.

      Subcontractor Coordination Is Part of the Process

      As projects progress, contractors often have multiple companies and trades working onsite at the same time.

      Each employer may have its own safety procedures, training requirements, and approach to managing hazards. Without effective communication, these differences can create confusion or leave gaps in safety responsibilities.

      Before new subcontractors begin work, contractors should establish clear expectations regarding site rules, communication, hazard reporting, emergency procedures, and coordination with other trades.

      Communication should continue throughout the project, particularly when work activities overlap or site conditions change.

      A safety program is much more effective when everyone working on the project understands how their responsibilities fit into the overall safety process.

      Use Jobsite Findings to Improve the Program

      Inspections, observations, incident investigations, and employee feedback can provide valuable information about whether a safety program is working as intended.

      If the same issues repeatedly appear, contractors should consider whether the existing process is addressing the underlying problem.

      For example, repeated housekeeping issues may indicate a need for clearer responsibilities or more frequent oversight. Recurring PPE violations may point to a training or communication issue. Repeated fall protection concerns may require a closer review of procedures, equipment, supervision, or work planning.

      The goal should not simply be to correct individual findings.

      The goal should be to use those findings to improve the safety process moving forward.

      How CORE Safety Group Can Help

      Keeping a construction safety program current while managing active projects can be challenging, especially for contractors without dedicated safety personnel.

      CORE Safety Group works with contractors to provide practical safety support that can adapt to the needs of the project.

      Our team can help with:

      • Safety Consulting to evaluate jobsite conditions, identify hazards, and provide ongoing safety guidance
      • Safety Staffing to provide dedicated safety professionals for projects that require onsite support
      • Safety Training to help employees and supervisors understand the hazards associated with their work
      • OSHA Training including OSHA 10-Hour and OSHA 30-Hour courses for construction professionals
      • Written Safety Programs to develop and maintain safety procedures that reflect a contractor’s operations
      • Jobsite Safety Inspections to identify hazards and help contractors address changing site conditions
      • Safe Assist for contractors looking for ongoing outsourced safety management and support

      CORE can also help contractors evaluate their existing safety processes and determine where additional training, documentation, inspections, or onsite support may be needed.

      A Safety Program Should Grow With the Project

      A written safety program is an important foundation for any construction company, but the work does not stay the same throughout the life of a project.

      As crews change, new phases begin, equipment is introduced, and site conditions evolve, safety planning needs to evolve with them.

      Regularly reviewing safety procedures, communicating changes, providing appropriate training, and using jobsite findings to improve existing processes can help contractors maintain a safety program that reflects the work actually being performed.

      Construction safety is not a one-time task. It is an ongoing process that should grow and adapt with the jobsite.

       

       

       

      If your organization needs additional support managing changing safety needs across your jobsites, CORE Safety Group can help.

      Contact CORE Safety Group to discuss your safety management needs and learn how Safe Assist® can provide ongoing safety support as your projects, crews, and jobsite conditions change.

      This article is provided for general informational purposes and is not legal advice. Employers should consult qualified safety professionals and legal counsel regarding their specific circumstances.

        Let's better your safety program

        Call: 888-250-1830

        Request a Quote












        For online training courses please visit our online training page





        Excavation Safety Plans Aren’t Enough: Managing Changing Conditions on Construction Jobsites

        Excavation and trenching operations are among the most hazardous activities in the construction industry. A project may begin with a carefully developed excavation plan, properly selected protective systems, and trained employees. However, as work progresses, conditions within and around the excavation can change.

        Soil can become unstable. Water can accumulate. Heavy equipment can move closer to the edge. A trench can become deeper or wider, or nearby work can affect the stability of the excavation.

        For construction companies, the challenge is ensuring that safety measures remain appropriate as the jobsite changes.

        A plan developed before excavation begins is important, but it should not be treated as a substitute for ongoing inspections, hazard recognition, and employee training.

        The question is not simply whether your company has an excavation safety plan. It is whether your team knows how to recognize when conditions have changed and what to do next.

        Why Excavation Conditions Can Change Throughout a Project

        Excavation work is dynamic. The conditions present when a trench is first opened may not be the same conditions workers encounter later that day or the following morning.

        Rain can change soil conditions and create additional hazards. Water accumulation may contribute to unstable conditions. Heavy equipment and materials near the excavation edge can affect the surrounding soil. Changes in excavation depth, width, or nearby work can also create new safety concerns.

        These changes can affect the stability of the excavation and the protective measures needed to keep employees safe.

        For contractors, this means an excavation that was inspected and considered suitable for work earlier in the week may require additional evaluation after a significant weather event or change in site conditions.

        1. Rain and Water Accumulation

        Rain can change soil conditions and create additional hazards within an excavation.

        Water accumulation may contribute to unstable conditions, and workers may also encounter hazardous atmospheres or unsafe access and egress.

        For contractors, this means an excavation that was inspected and considered suitable for work earlier in the week may require additional evaluation after a significant weather event.

        2. Heavy Equipment Near the Excavation Edge

        Construction equipment, materials, and vehicles can create additional loads near an excavation.

        Excavated materials and equipment that could fall or roll into an excavation must be kept at least 2 feet from the edge, or otherwise adequately restrained.

        As work progresses, the location of equipment and materials may change. A competent person should evaluate whether these changes affect excavation safety.

        3. Changing Soil Conditions

        Soil conditions are an important part of excavation safety.

        OSHA’s excavation requirements address soil classification and the selection of appropriate protective systems. If conditions affecting soil classification change, they must be evaluated by the competent person.

        A trench that was initially evaluated under one set of conditions may require a different assessment as excavation progresses.

        4. Changes to the Excavation Itself

        Excavation dimensions and surrounding work can change as a project moves forward.

        Changes in depth, width, location, spoil pile placement, or nearby structures may affect the hazards associated with the excavation.

        These changes should be considered as part of the company’s ongoing excavation safety process.

        The Role of the Competent Person in Excavation Safety

        A properly designated competent person is a critical part of an excavation safety program.

        A competent person is someone who can identify existing and predictable hazards and has the authority to take prompt corrective measures to eliminate them. For excavation work, the competent person should have the knowledge and training necessary to evaluate soil conditions, protective systems, and applicable requirements.

        The competent person is responsible for evaluating excavation conditions and determining whether workers can safely perform their tasks.

        This includes inspecting the excavation, adjacent areas, and protective systems for hazards such as:

        • Conditions that could result in a cave-in.
        • Failure of protective systems.
        • Hazardous atmospheres.
        • Water accumulation.
        • Other hazardous conditions.

        OSHA requires daily inspections before work begins, as needed throughout the shift, and after rainstorms or other hazard-increasing occurrences when employee exposure can reasonably be anticipated.

        If a hazardous condition is identified, the competent person must have the authority to take prompt corrective action, including removing employees from the hazardous area when necessary.

        Why Excavation Safety Training Must Go Beyond the Initial Orientation

        An employee may receive excavation safety training before beginning work on a project. However, training should also help workers recognize changing conditions and understand when to stop and report a concern.

        Employees working around excavations should understand how to recognize potential warning signs, follow protective-system requirements, report unsafe conditions, and understand the company’s procedures for addressing hazards.

        For construction companies, this means excavation safety training should address more than the basic rules.

        What Workers Should Understand

        Depending on their job responsibilities, employees working around excavations should understand:

        Recognizing changing conditions

        Workers should know how to recognize potential warning signs, including water accumulation, soil movement, or other conditions that may indicate a hazard.

        Understanding protective systems

        Employees should understand the protective systems used on their jobsites and the importance of following established procedures.

        Knowing when to report a concern

        Workers should know who the designated competent person is and how to report a potential hazard.

        Understanding access and egress

        Workers should know the requirements for safely entering and exiting excavations and the importance of maintaining access routes.

        Following stop-work procedures

        Employees should understand the company’s procedures for addressing unsafe conditions and when they should stop work and notify supervision.

        The specific training required depends on the employee’s duties and exposure to excavation hazards.

        How CORE Safety's Safe Assist® Program Can Support Excavation Safety

        Maintaining an effective excavation safety program requires more than developing written procedures. Construction companies also need ongoing support to evaluate jobsite conditions, communicate safety expectations, and provide employees with the knowledge needed to recognize hazards.

        CORE Safety Group’s Safe Assist® Program is designed to provide ongoing safety management support for organizations that need additional safety resources.

        Through Safe Assist®, CORE becomes an extension of the company’s safety team, providing access to experienced safety professionals and ongoing safety program support.

        For construction companies performing excavation and trenching work, this support can help strengthen the processes used to manage changing jobsite conditions.

        Onsite Safety Inspections and Audits

        CORE Safety professionals can conduct onsite safety inspections and audits to help identify potential hazards and evaluate safety practices.

        For excavation operations, inspections may help identify areas that require additional attention, such as:

        • Changing soil or excavation conditions.
        • Water accumulation.
        • Protective-system concerns.
        • Access and egress.
        • Equipment and materials near excavation edges.
        • Safety practices that may require additional training or follow-up.

        Written reporting and trend analysis can help company leadership understand recurring safety concerns and identify areas where additional support may be needed.

        Onsite Excavation Safety Training

        One of the most important ways to support excavation safety is through training that employees and supervisors can apply directly to their work.

        CORE provides onsite and online safety training options, including customized safety training tailored to an organization’s needs.

        Onsite training can provide an opportunity to discuss excavation hazards in the context of the company’s actual operations, equipment, work activities, and safety procedures.

        Training topics may include:

        • Excavation and trenching hazards.
        • Soil conditions and protective systems.
        • Competent person responsibilities.
        • Recognizing changing jobsite conditions.
        • Safe access and egress.
        • Water accumulation and other hazards.
        • Reporting unsafe conditions.
        • Company excavation safety procedures.

        Training should be developed and delivered based on the organization’s operations, employee responsibilities, and applicable requirements.

        Safety Program Development and Updates

        A written excavation safety program should reflect the organization’s work activities and safety expectations.

        CORE can assist with developing and continuously updating company safety programs to align with OSHA policies and recognized best management practices.

        As a company’s projects, equipment, and operations change, its safety program may need to be reviewed and updated.

        Safe Assist® provides ongoing safety management support to help organizations maintain their safety programs and address changing safety needs.

        Ongoing Safety Management Support

        Excavation safety is not limited to a single project meeting or training session.

        Companies may need ongoing assistance with inspections, safety meetings, reporting, training, and program management.

        CORE’s Safe Assist® Program provides access to a dedicated Safety Manager and a nationwide team of safety professionals. The program is structured around monthly coverage based on organizational needs.

        This can help organizations maintain consistent safety oversight while supporting their ongoing construction operations.

        Building a More Proactive Excavation Safety Program

        A successful excavation safety program should account for the fact that construction conditions change.

        The excavation that was safe to enter yesterday may require a different evaluation today. Weather, soil, equipment, and surrounding work can all affect the hazards present at a jobsite.

        For contractors, maintaining safe excavation operations requires ongoing attention to inspections, competent person responsibilities, employee training, and the company’s safety procedures.

        A written safety plan is an important starting point. But it must be supported by the people, training, and processes needed to implement it effectively.

        CORE Safety Group’s Safe Assist® Program can help organizations strengthen their safety management through onsite inspections, customized training, safety program support, and ongoing access to experienced safety professionals.

         

        If your organization needs additional support managing excavation safety, CORE Safety Group can help.

        Contact CORE Safety Group to discuss your safety management needs and learn how Safe Assist® can support your organization.

         

         

         

        This article is provided for general informational purposes and is not legal advice. Employers facing an OSHA citation should consult qualified legal counsel regarding their specific circumstances.

          Let's better your safety program

          Call: 888-250-1830

          Request a Quote












          For online training courses please visit our online training page





          OSHA Controlling Employer & Reasonable Care: Defending Multi-Employer Citations

          On a construction project involving multiple contractors, an OSHA citation does not always go only to the employer whose employees were exposed to a hazard. Under OSHA’s Multi-Employer Citation Policy, multiple employers may potentially be cited for the same hazardous condition.

          For general contractors, construction managers, and other entities with supervisory authority over a project, this frequently raises an important question:

          How far does a controlling employer’s responsibility extend?

          The answer matters because OSHA does not require a controlling employer to guarantee that every subcontractor complies with every OSHA requirement at every moment of the project.

          Instead, OSHA applies a standard of reasonable care.

          For contractors, that makes the quality of their safety-management process especially important. A strong safety system is not only about preventing injuries—it can also help demonstrate that the employer took reasonable steps to identify, communicate, and correct hazards.

          This is one of the primary objectives of CORE Safety Group’s Safe Assist® Program, which provides companies with ongoing professional safety-management support designed to improve accident prevention, strengthen oversight, and help establish a more consistent and defensible safety process before an OSHA inspection or incident ever occurs.

          OSHA's Four Categories of Employers

          Under OSHA’s Multi-Employer Citation Policy, OSHA first determines what role—or roles—an employer occupied with respect to the hazardous condition.

          OSHA identifies four categories:

          Creating Employer – The employer that caused the hazardous condition that violated an OSHA standard.

          Exposing Employer – An employer whose employees were exposed to the hazardous condition.

          Correcting Employer – An employer responsible for correcting the hazardous condition.

          Controlling Employer – An employer with general supervisory authority over the worksite, including the ability to correct safety violations itself or require another employer to correct them.

          An employer may fall into more than one category.

          After identifying the employer’s role, OSHA must then determine whether the employer took sufficient action to satisfy the obligations associated with that role.

          That second part of the analysis is critical.

          OSHA expressly recognizes that the obligations of these employers are not necessarily the same.

          For companies working on complex, multi-employer projects, clearly defining these roles and establishing appropriate safety-management procedures can significantly improve both field performance and regulatory preparedness. CORE Safety Group regularly assists clients with establishing these processes through project safety staffing, jobsite inspections, safety-program development, and ongoing Safe Assist® safety-management support.

          A Controlling Employer is Held to a "Reasonable Care" Standard

          OSHA’s Multi-Employer Citation Policy provides that a controlling employer must exercise reasonable care to prevent and detect violations on the site.

          But OSHA makes an additional distinction that can sometimes be overlooked when citations are issued.

          OSHA states that the measures a controlling employer must take to satisfy its reasonable-care obligation are less than those required of an employer protecting its own employees.

          According to OSHA, this generally means that a controlling employer is not required to:

          • inspect for hazards as frequently as the employer performing the work;
          • possess the same level of knowledge regarding the applicable OSHA standards; or
          • possess the same degree of trade-specific expertise as the subcontractor it hired.

          That distinction reflects a practical reality of construction.

          A general contractor may supervise dozens of contractors performing highly specialized work involving electrical systems, steel erection, cranes, excavation, roofing, scaffolding, mechanical systems, or other trades.

          The subcontractor performing that work ordinarily possesses substantially greater knowledge of its employees, equipment, work practices, hazards, and applicable trade requirements.

          The Multi-Employer Citation Policy does not eliminate the subcontractor’s responsibility simply because a general contractor has overall authority over the project.

          This is also why a proactive safety-management system should focus on reasonable oversight rather than attempting to replace each subcontractor’s safety responsibilities.

          CORE’s Safe Assist® Program is designed around that concept. Rather than treating safety as an occasional inspection or reactive response, Safe Assist® provides clients with ongoing access to experienced safety professionals who can help establish expectations, evaluate project risk, conduct periodic observations, assist with corrective actions, and create a more consistent framework for managing safety across multiple projects and subcontractors.

          “Controlling” Does Not Mean Strict Liability

          One of the most important concepts for contractors to understand is that being classified as a controlling employer does not automatically establish that an OSHA violation occurred.

          The analysis should not end with:

          “The general contractor controlled the project, therefore the general contractor is responsible.”

          Instead, OSHA’s policy requires an additional inquiry:

          Did the controlling employer exercise reasonable care under the circumstances?

          This is a fact-specific determination.

          OSHA identifies several factors that can affect the level and frequency of oversight reasonably expected from a controlling employer, including the:

          • scale of the project;
          • nature and pace of the work;
          • subcontractor’s safety history;
          • subcontractor’s level of expertise;
          • existence of previous violations; and
          • effectiveness of the controlling employer’s system for identifying, communicating, correcting, and following up on safety concerns.

          Therefore, determining whether a controlling employer exercised reasonable care requires more than simply identifying a hazard after the fact.

          The circumstances existing before the OSHA inspection or incident matter.

          This is where proactive safety management becomes particularly valuable.

          Through Safe Assist®, CORE helps clients establish processes that may include scheduled jobsite observations, safety-performance reviews, corrective-action tracking, management consultation, training, policy development, and documentation of safety activities. These measures can help reduce incidents while also creating evidence that the organization maintained an active and reasonable system for managing workplace safety.

          Consider a Common Construction Scenario

          Assume an electrical subcontractor removes a guard or otherwise creates an electrical hazard while performing specialized electrical work.

          The subcontractor’s employees are exposed to the condition.

          The general contractor has a safety program, conducts periodic inspections, discusses safety during coordination meetings, requires subcontractors to correct identified deficiencies, documents safety observations, and has no knowledge that the particular condition exists.

          OSHA later discovers the condition during an inspection.

          Several different employer classifications could potentially exist.

          The electrical contractor might be the creating employer because it created the condition and the exposing employer because its employees were exposed.

          Depending upon the project structure, the general contractor may qualify as the controlling employer.

          But that classification alone does not answer whether the general contractor should receive a citation.

          The appropriate question becomes whether the general contractor exercised reasonable care to prevent and detect the violation.

          That is a substantially different inquiry than asking whether the general contractor could theoretically have discovered the hazard if it had inspected the work more frequently.

          OSHA itself recognizes this distinction.

          A well-structured safety-management system can be especially important in this situation.

          For example, if the contractor can demonstrate that it:

          • periodically inspected the project;
          • communicated deficiencies to responsible subcontractors;
          • tracked corrective actions;
          • addressed recurring safety issues;
          • maintained documented safety meetings;
          • evaluated subcontractor performance; and
          • escalated serious or repeated violations,

          those facts may become highly relevant when evaluating whether the controlling employer exercised reasonable care.

          CORE Safety Group helps clients build and manage exactly these types of systems through our Safe Assist® safety-management program, onsite Safety Advisor staffing, safety audits and inspections, training, and project-specific consulting services.

           

          Reasonable Care Does Not Require Constant Surveillance

          OSHA does not generally expect a controlling employer to continuously monitor every subcontractor employee or every work activity occurring throughout a project.

          Nor does the Multi-Employer Citation Policy normally require a general contractor to possess the same technical expertise as the specialty contractor performing the work.

          That does not mean a controlling employer can ignore subcontractor safety.

          A general contractor that repeatedly observes serious violations, fails to enforce its safety requirements, ignores known deficiencies, or continues using a contractor with significant unresolved safety problems may have difficulty demonstrating reasonable care.

          The reasonable-care standard instead recognizes that:

          Effective oversight is different from constant supervision.

          A strong controlling-employer program commonly includes elements such as:

          • reasonable periodic safety observations;
          • subcontractor prequalification and safety-performance evaluation;
          • communication of project safety expectations;
          • documentation of identified deficiencies;
          • a defined process for communicating hazards to responsible contractors;
          • reasonable follow-up to determine whether significant issues were corrected;
          • escalation procedures for recurring or serious violations; and
          • appropriate coordination between project management, safety personnel, and subcontractors.

          These are also the types of functions that can be integrated into an outsourced or supplemental safety-management strategy.

          For companies that do not have sufficient internal safety staffing—or that need support across multiple locations—CORE’s Safe Assist® Program provides a scalable alternative.

          Clients receive access to professional safety management without necessarily having to build a full internal safety department. CORE can assist with inspections, program development, training, incident prevention, compliance strategy, subcontractor coordination, and ongoing safety-management initiatives based on the client’s specific operations and risk profile.

          The goal is simple:

          Help clients manage safety before an incident occurs rather than simply responding after one.

          Reasonable Care Should Be Demonstrable

          For contractors, the best time to establish a reasonable-care defense is before an OSHA inspection occurs.

          A company may have a strong safety culture and capable field personnel, but if its oversight activities cannot later be demonstrated, defending the company’s actions becomes more difficult.

          Documentation can help establish that the controlling employer maintained a reasonable system for detecting and addressing safety concerns.

          Useful records may include:

          • safety inspection reports;
          • subcontractor safety evaluations;
          • corrective-action records;
          • meeting minutes;
          • safety correspondence;
          • photographs;
          • orientation records;
          • disciplinary or escalation documentation;
          • subcontractor safety plans; and
          • records demonstrating follow-up on previously identified conditions.

          The objective is not to create paperwork for its own sake.

          The objective is to demonstrate that the company’s safety-management system actually functions.

          This is another key component of CORE’s approach.

          Through Safe Assist®, CORE works with clients to establish documented safety processes that are practical, repeatable, and scalable across an organization. That documentation can serve several purposes: improving accountability, identifying trends, measuring safety performance, helping reduce incidents, and providing a clearer record of the company’s ongoing safety efforts.

          When OSHA Arrives, the Work Has Already Started

          Companies sometimes begin evaluating their safety processes only after an OSHA compliance officer arrives onsite.

          By then, much of the evidence relevant to the reasonable-care analysis has already been created—or has not been created.

          A more effective strategy is to establish the processes beforehand.

          That may include:

          • defining who is responsible for safety oversight;
          • determining how frequently projects should be inspected;
          • identifying how deficiencies are documented;
          • establishing who receives corrective-action notices;
          • tracking whether significant hazards are corrected;
          • evaluating repeated subcontractor violations;
          • training project managers on safety responsibilities; and
          • periodically reviewing whether the overall system is working.

          CORE Safety Group’s Safe Assist® Program is intended to help clients build and maintain this type of proactive safety-management structure.

          Our professionals can function as an extension of the client’s management team, helping coordinate safety activities, conduct observations, identify gaps, develop improvement strategies, and provide ongoing professional guidance.

          For many clients, the value is not merely OSHA compliance.

          The larger objective is accident prevention, operational risk reduction, and the establishment of a sustainable safety-management system.

          The Difference Matters When Defending an OSHA Citation

          Even companies with strong safety programs can receive OSHA citations.

          When a controlling-employer citation is issued, however, the existence of the underlying hazardous condition should not necessarily be the end of the analysis.

          A meaningful citation review should evaluate questions such as:

          What employer created the condition?

          Whose employees were actually exposed?

          Who possessed the trade knowledge necessary to recognize the particular condition?

          How long had the condition existed?

          Did the general contractor know—or reasonably should it have known—about it?

          What inspection and oversight procedures were already in place?

          What was the subcontractor’s previous safety performance?

          Had similar deficiencies previously been identified?

          How quickly were deficiencies normally corrected when reported?

          What contractual authority did the alleged controlling employer actually possess?

          Was the employer truly acting as a controlling employer with respect to the cited condition?

          And perhaps most importantly:

          What evidence supports OSHA’s conclusion that the employer failed to exercise reasonable care?

          These distinctions can materially affect the evaluation of a citation.

          CORE Safety Group assists employers and their legal counsel in analyzing these issues following OSHA inspections and citations.

          Our team can review the citation, inspection documents, safety records, photographs, contracts, project responsibilities, employee exposure, and underlying safety standards to help determine whether OSHA’s allegations accurately reflect the employer’s role and conduct.

          OSHA Citation Informal Conference Support

          Employers generally have a limited period after receiving an OSHA citation to determine how they intend to respond.

          One potential step is an OSHA informal conference, during which an employer can meet with OSHA to discuss the citation, factual circumstances, classification, penalties, corrective actions, and potential resolution.

          The strength of that discussion often depends upon understanding both the OSHA standard and the actual safety practices occurring on the project.

          CORE Safety Group provides OSHA citation informal conference and technical defense support to help employers evaluate the allegations and prepare the factual and safety-related portions of their response.

          Our services can include:

          • citation and standard review;
          • Multi-Employer Citation Policy analysis;
          • controlling-employer reasonable-care analysis;
          • review of inspection evidence;
          • evaluation of employee exposure;
          • review of safety policies and procedures;
          • project and subcontractor responsibility analysis;
          • preparation of technical safety arguments;
          • informal conference support; and
          • coordination with the employer’s legal counsel.

          CORE does not replace legal counsel. Instead, our safety professionals provide the technical safety-management expertise that attorneys and employers may need when evaluating an OSHA citation.

          Expert Witness and Litigation Support

          When OSHA matters, workplace incidents, or construction disputes proceed beyond the initial citation process, the question of what constitutes reasonable safety practice can become even more significant.

          CORE Safety Group provides expert witness and litigation-support services involving workplace safety, OSHA compliance, construction safety management, and industry safety practices.

          Depending upon the matter, our experts may assist with evaluating:

          • controlling-employer responsibilities;
          • creating, exposing, and correcting employer obligations;
          • OSHA standards and accepted safety practices;
          • safety-management systems;
          • accident-prevention programs;
          • inspection and corrective-action procedures;
          • training programs;
          • construction safety practices;
          • incident causation; and
          • the reasonableness of an employer’s actions under the circumstances.

          This combination of proactive safety-management experience and post-citation technical analysis gives CORE a practical perspective on both sides of the issue.

          We help companies establish systems intended to prevent incidents—and when an OSHA citation or legal dispute occurs, we help evaluate whether those systems and actions met the applicable expectations.

          Proactive Safety Management is the Strongest Starting Point

          An OSHA defense should not begin when the citation arrives.

          It should begin with the safety-management practices that existed before the inspection occurred.

          A company that can demonstrate a thoughtful, documented, and consistently implemented approach to safety is generally in a stronger position than one attempting to reconstruct its efforts after an incident.

          That is the philosophy behind CORE Safety Group’s Safe Assist® Program.

          Safe Assist® provides clients with an ongoing safety-management resource designed to help:

          • identify and reduce workplace hazards;
          • improve accident-prevention strategies;
          • establish consistent safety expectations;
          • supplement internal safety resources;
          • conduct periodic safety inspections and audits;
          • assist with corrective actions;
          • improve safety documentation;
          • support management and field personnel;
          • provide employee and supervisor training; and
          • continuously improve the organization’s overall safety-management system.

          In other words, Safe Assist® is not simply an OSHA compliance service.

          It is a proactive risk-management strategy intended to help prevent injuries, reduce operational exposure, and establish the reasonable safety-management practices employers may later need to demonstrate.

          Reasonable Care—Not Perfection

          Multi-employer worksites are complex.

          Hazards can develop quickly, contractors perform specialized work, conditions change throughout the day, and no controlling employer can physically observe every activity occurring across a large project.

          OSHA’s own Multi-Employer Citation Policy recognizes this reality.

          The controlling employer’s obligation is reasonable care—not perfection.

          That distinction matters.

          It matters when designing a safety program.

          It matters when supervising subcontractors.

          It matters when OSHA conducts an inspection.

          And it can matter significantly when defending a citation.

          The best strategy is to establish reasonable, effective, and documented safety-management practices before OSHA ever arrives.

          And when a citation does occur, employers should carefully evaluate whether OSHA has properly considered the employer’s role, authority, knowledge, actions, and reasonable-care obligations.

          How CORE Safety Group Can Help

          CORE Safety Group provides nationwide safety-management support, OSHA compliance, citation support, and expert witness services to contractors and employers across the United States.

          Our services include:

          Whether the objective is preventing an incident, strengthening a company’s safety-management program, preparing for an OSHA inspection, or evaluating a citation after one has been issued, CORE can provide the professional safety resources needed to support the organization.

          Received an OSHA citation involving controlling-employer responsibility or a multi-employer worksite?

          Or want to strengthen your safety-management program before OSHA ever arrives?

          Contact us to discuss our Safe Assist® Program, OSHA citation informal conference support, or expert witness services.

          This article is provided for general informational purposes and is not legal advice. Employers facing an OSHA citation should consult qualified legal counsel regarding their specific circumstances.

          Sources:

          Application of the multi-employer policy to particular construction standards. | Occupational Safety and Health Administration

          Multi-Employer Citation Policy | Occupational Safety and Health Administration

            Let's better your safety program

            Call: 888-250-1830

            Request a Quote












            For online training courses please visit our online training page





            Can Automation Actually Solve Construction’s Struck-By Problem?

            Struck-by incidents remain one of construction’s “Fatal Four” hazards, and heavy equipment is involved in roughly 75% of struck-by fatalities. According to the Center for Construction Research and Training (CPWR), struck-by incidents accounted for 17.2% of construction deaths in 2018 and 15.4% in 2019, consistently the second-leading cause of fatalities on U.S. jobsites, behind only falls.

            For decades, the industry’s answer has been the same combination of spotters, high-visibility PPE, backup alarms, and internal traffic control plans. Those measures work, but they all depend on something that’s inherently unreliable under pressure: human attention. That’s the gap a newer category of jobsite technology, known as active fleet orchestration, is now being marketed to close, and it’s worth understanding what it actually does before deciding whether it belongs on your site.

            Why Struck-By Injuries Remain So Hard to Prevent

            Struck-by incidents don’t happen because crews ignore safety protocols. They happen because construction sites are dynamic environments where equipment paths, worker locations, and sightlines all change by the minute. A spotter can be looking the wrong way for two seconds. A radio call can be delayed. A worker can step into a blind spot that didn’t exist five minutes earlier because the grade changed or a stockpile shifted.

            NIOSH research backs this up: construction workers face roughly twice the nonfatal struck-by injury rate of all other industries combined, and pedestrian workers struck by vehicles account for about 48% of fatal struck-by injuries. Road construction crews see the highest fatality rates of all, which lines up with the fact that roughly 1 in 10 construction fatalities are tied to work zone incidents. None of this points to a training gap so much as a structural one: the controls in place are administrative and reactive, not built to catch a developing conflict before a person is already in the equipment’s path.

            What "Active Fleet Orchestration" Actually Does

            The technology getting attention this year works differently than the proximity alarms and backup cameras most fleets already have. Rather than alerting an operator after a worker is already close, active fleet orchestration platforms track the real-time position and intended path of every piece of equipment on a site relative to workers, and intervene, slowing, stopping, or rerouting a machine, before the paths actually converge.

            As Mel Torrie of Autonomous Solutions, Inc. put it in an industry piece published this month: “The safest way to handle a struck-by hazard is to make sure it never has a chance to form, positive separation between people and equipment, maintained continuously.” That’s a meaningful shift in framing. Instead of warning someone that danger is close, the system is designed to keep danger from forming in the first place, using predictive logic rather than a fixed proximity radius.

            Where This Fits Into an Existing Safety Program

            It’s worth being clear about what this technology is not: it’s not a replacement for spotters, traffic control plans, or PPE. The companies building these platforms are positioning them as a supplemental layer, not a substitute for the controls NIOSH already recommends: positive physical barriers between workers and traffic, improved visibility, sequential (not contact) triggers on equipment, and never working beneath a suspended load.

            For a safety manager, the practical question isn’t “spotters or software,” it’s where a predictive layer adds the most value on top of what’s already required. Sites with the highest struck-by exposure (active work zones, congested laydown yards, night shifts with reduced visibility) are the most logical starting point, since that’s where human attention is stretched thinnest and the cost of a missed cue is highest.

            The Real Barriers: Cost, Training, and Trust

            None of this is a simple retrofit. Equipping a mixed fleet with tracking and orchestration hardware carries real upfront cost, and older machines may need aftermarket sensor kits rather than factory-integrated systems. Connectivity is a genuine constraint on remote or rural sites where cellular coverage is inconsistent, and any system that intervenes in equipment operation needs a fallback plan for when it loses signal.

            The bigger barrier is often cultural rather than technical. Operators who have run equipment safely for twenty years can be skeptical of software second-guessing their judgment, and that skepticism isn’t unreasonable; it has to be earned through a system that reduces false alarms and proves itself in the field rather than adding friction to every shift. Any contractor evaluating this technology should expect a real change-management effort alongside the capital investment, not just a hardware purchase.

            How CORE Safety Group Can Help

            Struck-by incidents rarely come down to bad luck or a single operator’s mistake. They come from traffic control plans that were written once and never revisited, safety programs that don’t reflect how a site actually operates day to day, and no dedicated set of eyes walking the site to catch a developing hazard before it becomes an incident. That is exactly the gap CORE Safety Group’s safety consulting services are built to close.

            Our team conducts on-site safety inspections and auditing to evaluate how equipment, workers, and traffic actually interact on your jobsite, not just how the plan on paper says they should. Where that turns up gaps, our safety program assessment services help you rebuild struck-by prevention around your real site conditions, whether that means a stronger internal traffic control plan, added physical separation, or a clear-eyed evaluation of whether new equipment technology is worth the investment.

            For contractors who need a consistent safety presence rather than a one-time audit, our safety staffing services put an experienced safety professional on your site to catch what a busy superintendent can’t always see. And because a plan only works if crews and operators actually understand it, our onsite OSHA training keeps struck-by prevention part of the daily conversation instead of a binder that sits in the trailer.

            Struck-by risk changes as your site changes. If it’s been a while since your traffic control plan or equipment protocols were reviewed against how the site is actually running today, that’s worth a conversation before OSHA, or an incident, makes it one for you. Request a quote or reach out to our team to get started.

            *This article is intended as general guidance and does not cover every OSHA recordkeeping requirement or exemption that may apply to your business. For a full assessment of your specific obligations, talk with our Safety Consulting team or refer directly to OSHA’s recordkeeping regulations.*

              Let's better your safety program

              Call: 888-250-1830

              Request a Quote












              For online training courses please visit our online training page





              Behind The Hard Hat – Episode 2

              See Safe Assist® in Action — Real Safety Management Support, On the Job

              Ever wonder what a dedicated safety professional actually does on-site? In this episode of Behind the Hard Hat, we take you behind the scenes with a CORE safety manager during a live grocery inspection and fall protection stand down for two of our Safe Assist® clients Texas.

              With CORE’s Safe Assist® Program, you get a degreed, credentialed safety professional assigned to assist your organization — conducting site safety audits, OSHA compliance inspections, safety training, accident investigations, and more. Whether you’re in construction, manufacturing, roofing, or general industry, our safety professionals work as an extension of your team — when and where you need support.

              Not ready to hire a full-time safety director? Safe Assist® gives you expert-level safety support without the overhead. From jobsite inspections to OSHA defense, we handle it so you don’t have to.

              Learn More About Our Safe Assist® Program

              Behind The Hard Hat – Episode 1

              See Safe Assist® in Action — Real Safety Management Support, On the Job

              Ever wonder what a dedicated safety professional actually does on-site? Behind the Hard Hat takes you behind the scenes with a CORE safety manager during a live roofing inspection for one of our Safe Assist® clients in Mansfield, TX.

              With CORE’s Safe Assist® Program, you get a degreed, credentialed safety professional assigned to assist your organization — conducting site safety audits, OSHA compliance inspections, safety training, accident investigations, and more. Whether you’re in construction, manufacturing, roofing, or general industry, our safety professionals work as an extension of your team — when and where you need support.

              Not ready to hire a full-time safety director? Safe Assist® gives you expert-level safety support without the overhead. From jobsite inspections to OSHA defense, we handle it so you don’t have to.

              Learn More About Our Safe Assist® Program

              Heat Illness Prevention Refresher

              Overview

              The “Stay Cool, Stay Safe: Heat Illness Prevention Refresher” course is designed to reinforce and update your knowledge of heat-related hazards and prevention strategies in hot work environments. This concise course is ideal for individuals who have previously completed initial heat illness prevention training and need to maintain their competency.

              Who Should Enroll?

              This refresher course is essential for workers, supervisors, and managers across various industries, including construction, manufacturing, food processing (bakeries, foundries), warehousing, agriculture, transportation, and other service sectors where heat exposure remains a concern. It’s designed to keep safety practices sharp and relevant.

              What You'll Revisit:

              This course will refresh your understanding of critical aspects of heat illness prevention, including:

              • Physiological Impacts: A review of how heat and humidity affect the body, and the progression of heat-related illnesses.
              • Symptom Recognition: Reinforcing the ability to identify the signs and symptoms of heat cramps, heat exhaustion, and heat stroke.
              • Risk Mitigation: Reviewing personal and environmental risk factors and the strategies to minimize them.
              • Prevention Techniques: Refreshing best practices for hydration, acclimatization, work-rest schedules, and the use of protective measures.
              • Emergency Response: Reviewing the steps to take when someone experiences a heat-related emergency.
              • Updates on best practices: Review of changes in regulatory guidelines, or best practices.

              Course Features:

              • Targeted Review Modules: Focused modules designed to quickly refresh key concepts and address common challenges.
              • Module Quizzes: Short quizzes after each module to ensure retention and comprehension.
              • Updated Resources: Access to the latest OSHA guidelines, heat index charts, and printable reference materials.
              • Efficient Learning: Designed for quick and effective review, minimizing downtime.

              Important Notes:

              • Prerequisite: This is a refresher course. Participants must have completed an initial heat illness prevention training course.
              • Site-Specific Training: This online course supplements, but does not replace, site-specific training required by OSHA and other regulatory bodies.
              • Language Proficiency: The course is conducted in English. Participants must be proficient in English to complete the training.

              Course Details:

              • Duration: Approximately 45 minutes.
              • Prerequisites: Completion of an initial heat illness prevention training course.
              • Price: $25.00.
              • Refund Policy: Full refunds available within 72 hours of purchase, provided the course has not been completed.
              • Testing Details: Must pass each modular quiz to continue. Retakes are available. If all retakes are failed the course can be reset for another attempt. There is no final exam.

              Keep Your Team Safe and Prepared!

              Ensure your team stays up-to-date on heat illness prevention with this essential refresher course. Enroll today and maintain a safe and productive work environment.
              Purchase Course
              Buy in Bulk

              Heat Illness Prevention

              Overview

              The “Beat the Heat: Heat Illness Prevention” course is a crucial training program designed to equip individuals with the knowledge and practical skills necessary to recognize, prevent, and respond to heat-related illnesses in hot work environments. This comprehensive course is tailored for employees, supervisors, and managers committed to fostering a safe and productive workplace, while adhering to industry safety standards.

              Who Should Enroll?

              This course is vital for anyone working in industries where heat exposure is a concern. This includes, but is not limited to, construction, manufacturing, commercial kitchens, foundries, warehousing, agriculture, transportation, landscaping, and any service sector jobs involving outdoor or high-temperature environments.

              What You'll Learn:

              Participants will gain a thorough understanding of heat stress and its prevention by exploring:

              • Understanding Heat Stress: The physiological impact of heat and humidity on the human body, and how it leads to heat-related illnesses.
              • Identifying Heat Illnesses: Recognizing the signs and symptoms of various heat illnesses, including heat cramps, heat exhaustion, and heat stroke.
              • Risk Factor Analysis: Identifying personal and environmental risk factors that contribute to heat stress.
              • Preventative Strategies: Implementing effective preventative measures, such as hydration, acclimatization, and work-rest cycles.
              • Emergency Response: Learning how to provide immediate and appropriate first aid for individuals experiencing heat-related illnesses.
              • Environmental Controls: Understanding how to use engineering controls and administrative controls to reduce heat exposure.

              Course Features:

              • Interactive Learning Modules: Engaging modules with quizzes to reinforce learning and track progress.
              • Comprehensive Assessment: A final exam requiring an 80% passing score to earn your certificate of completion. Multiple retakes are available.
              • Valuable Resources: Downloadable study guides, direct links to OSHA resources on heat safety, and access to the National Weather Service heat index charts.
              • Flexible Learning: Learn at your own pace, anytime, anywhere.

              Important Notes:

              • Site-Specific Training: This course provides foundational knowledge. Employers are required to provide site-specific training to address unique workplace hazards and ensure compliance with OSHA regulations.
              • Language Proficiency: The course is conducted in English. Participants must have a strong understanding of English to comprehend the material.

              Course Details:

              • Duration: Approximately 60 minutes.
              • Prerequisites: None required.
              • Price: $30.00.
              • Refund Policy: Full refunds available within 72 hours of purchase, provided the course has not been completed.
              • Testing Details: Must pass each modular quiz to continue, and score 80% on the final exam to receive a certificate. Retakes are available. If all retakes are failed the course can be reset for another attempt.

              Take Control of Heat Safety!

              Equip yourself and your team with the knowledge and skills to prevent heat-related illnesses. Enroll in the “Beat the Heat: Heat Illness Prevention” course today and create a safer, more productive work environment.

              Purchase Course
              Buy in Bulk
              Core Safety Group
              Columbia Southern University Associated General Contractors of America American Society of Safety Professionals American Subcontractors Association Associated Builders and Contractors Board of Certified Safety Professionals